啟鯤科技Qikun-Sealerll封管機
啟鯤科技Qikun-Sealerll封管機
啟鯤科技Qikun-Sealerll封管機
啟鯤科技Qikun-Sealerll封管機
啟鯤科技Qikun-Sealerll封管機
啟鯤科技Qikun-Sealerll封管機

啟鯤科技Qikun-Sealerll封管機

價格

訂貨量(臺)

￥150000.00

≥1

聯系人

㜉㜆㜊㜈㜊㜄㜈㜈㜄㜆㜆

發貨地 浙江省杭州市
進入商鋪
掃碼查看

掃碼查看

手機掃碼 快速查看

在線客服

商品參數
|
商品介紹
|
聯系方式
軟管尺寸 Tubingsize 外徑OD l/4,,-1.0,' （6.35-25.4 mm, type I 最大封管外徑尺寸為7/8", type II 最大封管外 徑尺寸為 1.0", type I can handle tubing with max OD of 7/8", type II can handle tu bing with max OD of 1.0"）壁厚 Wall thickness l/16"-l/8,, （1.6-3.2 mm）
軟管類型 Tubingtypes 適用于C- FLEX、PharMed BPT、Advantaflex 等TPE管
熱封時間 Sealing cycle time 1.5-5.0 min （受軟管規格、內部物料等影響，時間低于5分鐘） Depending on the tubing size and brand, sealing cycle of Tube sealerI is less than 5 minutes.
尺寸 Dimensions （L* W* H） 230mm*200mm*240mm
重量 Weight 約4 kg
主要材質與表面處理 Material and Surface 不銹鋼，可使用75%酒精消毒 stainless steel, it can be sterilized with 75% alcohol.
使用環境 Use environment 環境溫度 15~35°C,濕度 Environment temperature： 15~35°C, Relative humidity 35-65%
冷卻方式 Cooling mode 風冷 Forced air cooling
溫度傳感器 Temperature sensor 鉗溫度傳感器 Pt temperature sensor
程序選擇方式 Program select mode 通過觸控按鈕選擇封管程序 Select the sealing program by press the push button
管路壓力范圍 封管過程中管內壓力范圍-l...+0.5baro封管結束后（冷卻至室溫）管路承壓范圍（不超出管路制造商的管路設計承壓范圍）為-l...+0.5bar。During sealing process:-1...+0.5 bar., After sealing process:-1...+1.0 bar, but not higher than specification of tube manufacturer. Tube has to be cooled off to room temperature.
電源 Power requirements 100-240VAC, 47-63 Hz
額定功率Rated power 75W
商品介紹


Qikun-Sealerll無菌封管機

 

 

Qikun-Sealerll是一種全自動裝置，用于永久性、無泄漏密封熱塑管。

Qikun-Sealer II is a fully automated device, designed to produce permanent and consistent leak free sea Is on thermoplastic tubing. 

應用（APPLICATIONS）

Qikun-SealerII用于斷開生物制藥工藝中使用的一次性袋上的熱塑管，例如C-flex、Advantaflex、FluiSoft、SanipureTMPharmed?？稍诜菬o(wú)菌環境中斷開單 個袋子或袋子組件，并保持產品的無菌性。

Qikun-Sealer II is used to disconnect thermoplastic tubing such as C-Flex, Advanta flex, on disposable bag assemblies used in biopharmaceutical manufacturing processes. Individual bags or bag assemblies can be disconnected in a non sterile environment by maintaining sterility of the product. 

工作原理（OPERATINGPRINCIPLE）

兩個加熱元器件對帶液或不帶液熱塑管進行擠壓，并對受擠壓熱塑管進行加熱。在熱量和擠壓雙重作用下，管子熔合成均勻密封截面，可用剪刀從中將管子斷開。

The inserted empty or liquid filled tube will be compressed and heated between two heating elements. The heat and the compression force will fuse the tube to a homogeneous section. This section can be cutin the middle by using sharp scissors.

 

技術參數（TECHNICALSPECIFICATION）

 

 

 

產品特點

（Product features）

靈活適用

FLEXIBILITY 

一臺機器，可適配從管徑1/4"-1.0" （最大封管外徑為1.0"）、壁厚1/16"-1/8"管的密封，這使得它非常適合實現一次性袋技術。

One machine can be adapted to seal from 1/4" to 1.0" tubing diameter or from 1/16" to 1/8" pipe thickness （Tube sealer can handle tubingwith max OD of 1.0"） .which makes it ideal for the implementation of Single Use Bag Technology.

操作簡單

EASY TO USE

一鍵選擇管徑、一鍵熱封、一鍵開蓋，操作便捷。

Easy to operate: One-button to select tube size, one-button to start sealing, and one- button to open the cover.

熱封時間短

SHORT SEALING CYCLES

對于不同管型和品牌的熱塑管，平均熱封時間在L5-5.0分鐘

Depending on the tubing size and brand, the average sealing cycle times arebetween 1.5 to 5.0 minutes. 

穩定 

STABILITY

Qikun-Sealer II能確保在無菌條件下斷開熱塑管，熱密封具有極高的穩定性。所有機器在發貨前均進行單獨測試，以確保機器穩定可靠。

The thermal seal produced by the Qikun-Sealer II ensures an extraordinary level of stability and guarantees sterile disconnections. All units are individually tested before dispatch to ensure maximum reliability.

 訂購信息（ORDERING INFORMATION）


聯系方式
公司名稱 杭州啟鯤科技有限公司
手機 㜉㜆㜊㜈㜊㜄㜈㜈㜄㜆㜆
地址 浙江省杭州市