進口液化天然氣電磁閥德國洛克品牌產品介紹

一、進口液化天然氣電磁閥結構特點：

1、經過低溫深冷處理，能耐-196℃低溫

2、獨特設計、壽命超長、性能穩定、密封性好、開關迅速。

3、獨特設計、外觀精美；活塞結構、性能穩定；低溫材料、密封性好專制線圈、不易燒毀。

4、閥芯均為不銹鋼活塞式,活塞環用特殊耐低溫、耐磨材料制作:活塞與金屬閥腔不產生直接摩擦,閥體安裝方向無限制；特制線圈,不易燒毀；長時間停止動作重新啟動,作同樣靈敏。

1. After cryogenic treatment, it can withstand - 196 ℃ low temperature

2. Unique design, long service life, stable performance, good sealing and quick switching.

3. Unique design, beautiful appearance; piston structure, stable performance; low temperature material, good sealing performance, autocratic coil, not easy to burn.

4. The valve core is stainless steel piston type, and the piston ring is made of special low temperature resistant and wear-resistant materials: the piston and metal valve chamber do not have direct friction, the installation direction of the valve body is unlimited; the special coil is not easy to burn; it stops and restarts for a long time, which is equally sensitive.

二、進口液化天然氣電磁閥工作原理：

常閉：當線圈通電時，先導閥芯吸合，先導孔打開，閥上腔卸壓，活塞靠下腔介質壓力推動，電磁閥打開；當線圈斷電時，先導閥芯靠彈簧復位，先導孔關閉，閥腔由活塞節流孔增壓和復位彈簧的推力，電磁閥關閉。

常開：當線圈通電時，先導孔關閉，閥上腔由活塞節流孔增壓和復位彈簧的推力，電磁閥關閉。當線圈斷電時，先導閥芯靠彈簧復位，先導孔打開，閥上腔卸壓，活塞靠下腔介質壓力推動，電磁閥打開。

When the pressure of the pilot valve core is opened, the solenoid valve is closed by the pressure of the solenoid valve.

Normally open: when the coil is energized, the pilot hole is closed, the upper chamber of the valve is pressurized by the piston orifice and the thrust of the return spring, and the solenoid valve is closed. When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is opened, the pressure in the upper chamber of the valve is released, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve is opened.

三、進口液化天然氣電磁閥規格參數：

1、規格尺寸： DN1-300mm

2、壓力范圍： 0-0.3MPa（無壓差）、0-0.6MPa（無壓差）、0.03-0.6MPa、0.03-1.6MPa、0.03-2.5MPa、0.03-4.0MPa、0.03-6.3MPa

3、介質溫度： -60℃、-120℃、-196℃，根據工況要求選擇。

4、環境溫度： -10-40℃、-20-40℃、-40-40℃、-10-60℃，根據工況要求選擇。

5、動作方式： 直動型、先導型、反沖型（無壓差型），根據口徑大小、介質壓力選擇其中一種。

6、控制方式： 常閉式、常開式，根據工況要求選擇。

7、電源電壓： AC24V、AC36V、AC127V、AC220V、AC380V、DC12V、DC24V、DC36V、DC72V、DC110V、DC220V，根據工況要求選擇。

8、防護等級：IP65

9、防爆等級：ExdⅡBT6，ExdⅡCT4，ExdⅡCT5，ExdⅡCT6

10、連接方式： 螺紋連接，法蘭

11、閥體材質： 304不銹鋼、316不銹鋼，根據工況要求選擇。

12、適用介質：液氨、液氨、液氬、液氨，液空、液化天然氣、LO2、LN2、LAR、LNG等

13、應用范圍 ：乙烯，液化天然氣裝置，天然氣LPG LNG儲罐，接受基地及衛星站，空分設備，石油化工尾氣分離設備，液氨、液氨、液氬、二氧化碳低溫貯槽及槽車、變壓吸附制氧等裝置。

1. Size: DN 1-300 mm

2. Pressure range: 0-0.3mpa (no pressure difference), 0-0.6mpa (no pressure difference), 0.03-0.6mpa, 0.03-1.6mpa, 0.03-2.5mpa, 0.03-4.0mpa, 0.03-6.3mpa

3. Medium temperature: - 60 ℃, - 120 ℃, - 196 ℃, selected according to working conditions.

4. Ambient temperature: - 10-40 ℃, - 20-40 ℃, - 40-40 ℃, - 10-60 ℃. It is selected according to the working conditions.

5. Action mode: direct acting type, pilot type, recoil type (no pressure difference type), one of which is selected according to the caliber size and medium pressure.

6. Control mode: normally closed and normally open, selected according to working conditions.

7. Power supply voltage: AC24V, ac36v, ac127v, AC220V, AC380V, DC12V, DC24V, DC36V, dc72v, dc110v, dc220v, selected according to the working conditions.

8. Protection grade: IP65

9. Explosion proof grade: Exd Ⅱ BT6, Exd Ⅱ cT4, Exd Ⅱ CT5, Exd Ⅱ CT6

10. Connection mode: threaded connection, flange

11. Valve body material: 304 stainless steel, 316 stainless steel, selected according to the working conditions.

12. Applicable media: liquid ammonia, liquid ammonia, liquid argon, liquid ammonia, liquid air, liquefied natural gas, LO2, LN2, LAR, LNG, etc

13. Application scope: ethylene, liquefied natural gas unit, natural gas LPG and LNG storage tank, receiving base and satellite station, air separation equipment, petrochemical tail gas separation equipment, low temperature storage tank and tank car of liquid ammonia, liquid ammonia, liquid argon and carbon dioxide, pressure swing adsorption oxygen production device, etc.

四、進口液化天然氣電磁閥產品簡介： 

德國《LOCKE》洛克進口液化天然氣電磁閥是指閥芯由經低溫深冷處理不銹鋼制成，密封件采用特種耐低溫材料，最低溫度可達-196度，有線圈驅動閥門開關，可實現對低溫介質的遠程自動化控制的閥門，適用于對液氨介質的開啟和關閉。

"Lock" imported liquefied natural gas solenoid valve in Germany refers to the valve core made of low temperature and cryogenic treatment stainless steel, the seal adopts special low temperature resistant material, the minimum temperature can reach - 196 degrees, and the valve switch driven by coil can realize remote automatic control of low temperature medium, which is suitable for opening and closing of liquid ammonia medium.