江蘇春晨電纜有限公司生產春晨JFEYH高壓電機引接線 電機引出線，穩壓器現在被越來越多的人使用，她可以解決電壓不穩帶來的煩惱。穩壓器原理：由調壓電路、控制電路、及伺服電機等組成，當輸入電壓或負載變化時，控制電路進行取樣、比較、放大，等電路組成的，被雷電擊后最容易損壞的就是電路版。那么穩壓器延時開關怎么用？穩壓器中的長延時與短延時是什么意思？有什么用？

The voltage regulator is now used by more and more people. It can solve the trouble caused by voltage instability. Principle of voltage regulator: it is composed of voltage regulating circuit, control circuit, servo motor, etc. when the input voltage or load changes, the control circuit is composed of sampling, comparison, amplification, etc. the circuit board is the most vulnerable to damage after being struck by lightning. How to use the delay switch of the voltage regulator? What is the meaning of long time delay and short time delay in voltage regulator? What's the usage?

穩壓器的延時是針對如冰箱壓縮機類這樣的電器的。春晨JFEYH高壓電機引接線 電機引出線我們都知道冰箱在工作過程中如果突然停電再馬上來電這是冰箱壓縮機會應排氣壓力高而堵轉。這樣就會燒毀壓縮機。為了解決這個問題。就使用了延遲功能。然壓縮機能正常啟動。

The time delay of the voltage regulator is for electrical appliances such as refrigerator compressors. We all know that in the process of refrigerator operation, if there is a sudden power failure and then a call immediately, it is the refrigerator compressor that should have high exhaust pressure and stall. This will burn down the compressor. To solve this problem. The delay function is used. However, the compressor can start normally.

穩壓器面板上延時工作指示燈的工作狀態是,處于延時狀態時指示燈不亮(輸出插座沒電輸出,電冰箱或其他電器不會工作),當延時完畢后指示燈亮(輸出插座有電輸出,電冰箱或其他電器正常工作);所以我們經?？吹降姆€(wěn)壓器延時指示燈都是經常亮著,除非斷電后重新來電,此時穩壓器又要處于延時狀態,指示燈又不亮,過3-5秒后,延時完畢又開始工作,指示燈又亮.。

The working state of the delay indicator on the regulator panel is that the indicator is not on when it is in the delay state (the output socket has no power output, the refrigerator or other electrical appliances will not work), and the indicator is on when the delay is over (the output socket has power output, the refrigerator or other electrical appliances are working normally); therefore, the delay indicator of the regulator we often see is always on, Unless the power is cut off, the voltage regulator will be in delay state again, and the indicator light will not be on again. After 3-5 seconds, after the delay, it will start to work again, and the indicator light will be on again.