用于單頭非標模擬相機的小型圖像采集卡

特性一覽

• 1個 10 位 40 MHz A/D 轉換器，帶一個 8 位或 10 位LUT
• 32 位 33 MHz PCI 總線，標準和小型支架
• 極低同步抖動的 D3 技術
• 支持百萬像素逐行掃描和隔行相機、異步復位和曝光控制
• 觸發，閃光及通用 I/O 線

Mechanical Format Low profile, half-length, 32-bit Conventional PCI card Dimensions L 168 mm x H 64 mm L 6.6 in x H 2.21 in Host bus Standard PCI 32-bit, 33 MHz, 3.3 V and 5 V signaling DMA 32-bit Peak delivery bandwidth 132 MB/s Effective (sustained) delivery bandwidth 90 MB/s (Host PC motherboard dependent) Power consumption Max. 6.8 W (1.45 A @ +3.3V, 400 mA @ +5V), excluding I/O power output Camera / video inputs Interface standard(s) Non-standard Analog Connectors CAMERA: high-density sub-D 15-pin male connector on the bracket Camera internal: 10-pin shrouded header video connector on the PCB Termination resistor Selectable by software Number of cameras One single-tap camera Number of cameras (at full frame rate) 1 A/D converter One, 10-bit, 40 MHz Maximum camera line rate 49.5 kHz in synchronous mode 31.5 kHz in asynchronous reset mode On-board processing On-board memory 16 MB (8 MB for image data) Input LUT (Lookup Table) 1 x 8- or 10-bit LUT