進口電子式電動雙座調節閥產品列表德國洛克

一、進口電子式電動雙座調節閥描述：

德國LOCKE洛克進口電子式電動雙座調節閥，由LOCKE系列(或PSL系列)直行程電子式電動執行器和直通雙座調節閥體組成。電子式電動雙座調節閥內含飼服功能，接受統一的4-20mA或1-5V·DC的標準信號，將電流信號轉變成相對應的直線位移，自動地控制調節閥開度，達到對管道內流體的壓力、流量、溫度、液位等工藝參數的連續調節。

電子式電動雙座調節閥采用雙導向結構，具有結構緊湊、重量輕、動作靈敏、閥容量大、流量特性精確、拆裝方便等特點。廣泛應用于精確控制氣體、液體、蒸汽等介質，特別使用于壓差較大且對泄露量要求不嚴格干凈介質場合。

German locke electronic double seat control valve is composed of lock series (or PSL Series) straight stroke electronic electric actuator and straight through double seat regulating valve body. The electronic electric double seat control valve contains feeding and service function. It receives the unified standard signal of 4-20mA or 1-5V · DC, converts the current signal into the corresponding linear displacement, and automatically controls the opening of the regulating valve, so as to continuously adjust the process parameters such as pressure, flow, temperature and liquid level of the fluid in the pipeline.

The electronic electric double seat regulating valve adopts double guiding structure, which has the characteristics of compact structure, light weight, sensitive action, large valve capacity, accurate flow characteristics and convenient disassembly and assembly. It is widely used in the precise control of gas, liquid, steam and other media, especially in the case of large pressure difference and not strict requirements on the leakage of clean media.

二、進口電子式電動雙座調節閥技術參數：

Nominal diameter DN 15-200 mm

Nominal pressure: ANSI 125-4500 JIS 10-40k pn1.6-75mpa

Connection type: flange connection FF, RF, RJ, LG

Flange standard: JIS b2201-1984, ANSI b16.5-1981, GB / t9112-9124-2000, etc

Welding connection? Fillet welding SW or according to user requirements

Materials: cast steel (zg230-450), cast stainless steel (zg1cr18ni9ti, zg1cr18ni12mo2ti, zg00cr18ni12mo2ti), titanium, etc. or according to user requirements

Upper valve cover: normal temperature type (P): - 17 ～ + 230 ℃

Elongation type I (E1) - 45 ～ - 17 ℃ + 230 ～ + 566 ℃

Elongation type II (E2I) - 100 ～ - 45 ℃

Elongation type II (e2w) - 196 ～ - 100 ℃

Note: the working temperature shall not exceed the allowable range of various materials.

Gland type: bolt compression type

Packing: V-type polytetrafluoroethylene packing, asbestos impregnated polytetrafluoroethylene asbestos packing, asbestos braided packing and graphite packing

Valve assembly

Spool type: single seat plunger type

Flow characteristic, metal seat equal percentage characteristic (%) and linear characteristic (L), refer to flow characteristic curve

The high precision flow characteristics of CV value from 0.04 to 14 are in accordance with iec534-2 standard

Soft seat equal percentage characteristic (%) and linear characteristic (L), refer to flow characteristic curve

Note: for operating temperature and differential pressure of PTFE valve seat, refer to flow characteristic curve

Materials: stainless steel (1Cr18Ni9Ti, 1cr18ni12mo2ti, 17-4PH, 9Cr18, 316L), stainless steel surfacing stellite alloy, titanium and corrosion resistant alloy, etc

Electric actuator

Types: lock series electric actuator; PSL series electronic electric actuator; RS series electric actuator; PSL series electronic electric actuator

Input signal lock actuator: type II 0 ～ 10mA · DC (input resistance 200 Ω); type III 4 ～ 20mA · DC (input resistance 250 Ω) PSL actuator: 4 ～ 20mA · DC or 1 ～ 5V (input resistance 250 Ω) rs actuator: 0 ～ 10mA · DC, 4 ～ 20mA · DC, PSL actuator: 4 ～ 20mA · DC (Note: please use shielded wire for signal line)

supply voltage

DKZ actuator: 220 V, 50 Hz

361l actuator: 220V, 50 / 60Hz

RS actuator: single phase control 220 V · AC ± 5%; three phase control 380 V ± 5%

PSL actuator: single phase control 220 V, 50 Hz (power supply voltage can also be customized according to user requirements)

Manual mechanism

DKZ actuator handwheel

361l actuator clutch type

RS actuator handwheel

PSL actuator handwheel

Ambient temperature - 20 ～ + 60 ℃

Valve action type: Electric close or electric open

三、進口電子式電動雙座調節閥工作原理：

進口電動(單座,雙座,套筒)調節閥,是電動單元組合儀表中的執行單元,它是生產過程自動調節系統中的重要環節之一,它以AC220V電源電壓為動作力,接受統一標準信號0~10mA DC或4~20mA DC,將此轉為與輸入信號相對應的上下位移,自動地操縱閥門,改變閥門的開度位移,從而達到對工藝管路流體介質如壓力,流量,溫度,液位等參數的自動調節控制。